ISSN print edition: 0366-6352
ISSN electronic edition: 1336-9075
Registr. No.: MK SR 9/7

Published monthly
 

Analysis of mass transfer performance of micromixer device with varying confluence angle using CFD

Urooj Fatima, M. Shakaib, and Inayatullah Memon

Department of Chemical Engineering, NED University of Engineering and Technology, Karachi, Pakistan

 

E-mail: mshakaib@neduet.edu.pk

Received: 5 July 2019  Accepted: 21 October 2019

Abstract:

The computational fluid dynamics (CFD) study on micromixers in this paper illustrates the effect of confluence angle on mixing performance at different Reynolds numbers and flow rate ratios. The mixing performance parameters such as mixing quality and effectiveness increases with the increase in Reynolds number for all the micromixer geometries. For any value of Reynolds number, the angle of confluence is found to have a significant effect on flow behavior in the mixing channel and thus on mass transfer. The formation of vortices and the interlacing of fluid streams are identified as the favorable phenomena due to which mass transfer or mixing of fluid streams is enhanced. The mixing effectiveness is mostly observed to be high in case of unequal flow rates in the two feed/inlet channels. The optimum value of confluence angle depends of flow rate ratio. When flow rate ratio is high, T-shaped micromixer (θ = 180°) provides better performance while for other ratios, micromixers with relatively large angles of confluence are found more suitable.

Keywords: Computational fluid dynamics; Micromixer; Confluence angle; Mixing quality

Full paper is available at www.springerlink.com.

DOI: 10.1007/s11696-019-00975-8

 

Chemical Papers 74 (4) 1267–1279 (2020)

Saturday, October 05, 2024

IMPACT FACTOR 2023
2.1
SCImago Journal Rank 2023
0.381
SEARCH
Advanced
VOLUMES
© 2024 Chemical Papers