ISSN print edition: 0366-6352
ISSN electronic edition: 1336-9075
Registr. No.: MK SR 9/7

Published monthly
 

Influence of diazonium and surfactant modification of the mesoporous material on its adsorption properties

Mariusz Sandomierski, Kornelia Poniedziałek, Katarzyna Bielicka-Daszkiewicz, and Adam Voelkel

Institute of Chemical Technology and Engineering, Poznan University of Technology, Poznań, Poland

 

E-mail: mariuszsandomierski@wp.pl

Received: 15 March 2019  Accepted: 5 September 2019

Abstract:

We describe a new and direct route to obtain Al-SBA-15-modified materials with different groups on their surface using diazonium salts. For comparison, modification using surfactants was also used. In the present study, we decided to examine the applicability of these materials in the adsorption of compounds released from dental fillings. The effectiveness of modification was proved by results of Fourier transform infrared spectroscopy and energy-dispersive spectrometry. The results indicate the formation of characteristic groups on the surface of the materials. The materials after modification are characterized by smaller surface area and pore volume, which is result of covering the surface with an aryl or surfactant layer. The adsorption properties change after modification and depend on the used modifier. Diazonium modification has a positive effect on sorptive properties when hydroxyl and dimethylamine groups are obtained. The methods of material modification presented in this work may in the future lead to the improvement in the properties of sorbents used in solid-phase extraction.

Keywords: Adsorption; Mesoporous; Diazonium modification; Solid-phase extraction

Full paper is available at www.springerlink.com.

DOI: 10.1007/s11696-019-00926-3

 

Chemical Papers 74 (3) 929–938 (2020)

Thursday, October 22, 2020

IMPACT FACTOR 2019
1.680
SCImago Journal Rank 2019
0.331
SEARCH
Advanced
VOLUMES
© 2020 Chemical Papers