ISSN print edition: 0366-6352
ISSN electronic edition: 1336-9075
Registr. No.: MK SR 9/7
Influence of photoinitiator and curing conditions on polymerization kinetics and gloss of UV-cured coatings
V. Jančovičová, J. Kindernay, Z. Jakubíková, and I. Mrlláková
Institute of Polymer Materials, Faculty of Chemical and Food Technology, Slovak University of Technology, Radlinského 9, SK-812 37 Bratislava 1, Slovak Republic
Received: 5 December 2006 Revised: 10 May 2007 Accepted: 18 May 2007
Abstract: Polymerization kinetics and gloss of different formulations of coatings at different UV curing conditions were studied. The results showed that the photoinitiator type, its concentration, sample coating thickness, as well as the UV light intensity were the most significant factors affecting the polymerization course and the gloss of UV-cured films. The increasing concentration of the photoinitiator and the UV light intensity significantly decreased the gloss of the cured surface. The influence of the sample coating thickness on the kinetics and final gloss was also considerable.
Keywords: gloss - UV-curing - IR spectroscopy - layer thickness - UV-light intensity
Full paper is available at www.springerlink.com.
Chemical Papers 61 (5) 383–390 (2007)
Friday, September 22, 2023